MFSDA-Wenzhou Meric Hydraulic Technology Co.,Ltd

Category：

Cartridge valve

Flow control valve

Diverter and collector valve

MFSDA

Features In combining mode, compensating characteristics will cause the the circuit with the lowest load to receive the higher percentage of flow. If a synchronization feature is not included, an additive accuracy error will be experienced with each full stroke of the actuator. In motor circuits, rigid frames or mechanisms that tie motors together, and/or complete mechanical synchronized motion of the output shaft of the motors, either by wheels to the pavement or sprockets to conveyors, will contribute to cavitation, lock-up and/or pressure intensification.

You can send us an email：

Product Details

MFSDA MFSDA

Specifications

Operating Pressure 350BAR

Flow 12-60L/min

Temperature -30°C to +120°C(-22°F to+250°F)

Cavity T-32A see page K-7

Fluids Mineral-based fluids with viscosities of 7.4 to 420 cSt.

Features

In combining mode, compensating characteristics will cause the the

circuit with the lowest load to receive the higher percentage of flow.

If a synchronization feature is not included, an additive accuracy

error will be experienced with each full stroke of the actuator.

In motor circuits, rigid frames or mechanisms that tie motors together,

and/or complete mechanical synchronized motion of the output shaft

of the motors, either by wheels to the pavement or sprockets to

conveyors, will contribute to cavitation, lock-up and/or pressure

intensification.

Operation

Closed-center flow divider/combiners are sliding-spool, pressure

compensated devices used to split flow in one direction and combine

flow in the opposite direction. These valves may be used to accurately

control two or more cylinders or hydraulic motors where bidirectional

operation is required.

None

Related Products

MCACA-LHN

MCBCA

Contact Info

Add: No. 7 Xinxing Road, Ouhai Sanxi Industrial Park, Wenzhou City

Tel:86-577-88915122 86-577-86258768-801
E-mail:sales1@meric.cn sales2@meric.cn

Products

Cartridge valve

Valve block

Cavity

Coil

京ICP备10002622号-38

MERIC hydraulic

Hydraulics is a term used in the mechanical industry, electromechanical industry. Hydraulics can be used as a power transmission method , which becomes hydraulic transmission. Hydraulics can also be used as a control method , called hydraulic control.

MERIC hydraulic