Category：
Balance valve
Load holding valve
MCBCA
The setting value of the balance valve should be at least 1.3 times of the load pressure value. Backpressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the backpressure.Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages
You can send us an email：
Related Products
MADRV2-10-30
MADRV2-08-33
MBVE-R1-N
MCACA-LHN
MBH-6T-M3.0
Contact Info
Add: No. 7 Xinxing Road, Ouhai Sanxi Industrial Park, Wenzhou City
Tel:86-577-88915122 86-577-86258768-801
E-mail:sales1@meric.cn sales2@meric.cn
MERIC hydraulic
2
Hydraulics is a term used in the mechanical industry, electromechanical industry. Hydraulics can be used as a power transmission method , which becomes hydraulic transmission. Hydraulics can also be used as a control method , called hydraulic control.
MERIC hydraulic
3
Hydraulics is a term used in the mechanical industry, electromechanical industry. Hydraulics can be used as a power transmission method , which becomes hydraulic transmission. Hydraulics can also be used as a control method , called hydraulic control.